|
|
|
|
|
|
|
|
ELT 102 LAB POWER SUPPLY
One Vector Board, Three resistors: (one 5 Ohm 5W, one 100 Ohm 1W, one 390 Ohm 1W), Four Capacitors: (one 0.1 uF MR, one 0.22uF MR, onen 1000 uF EA, one 2200 uF EA), Five Semiconductors: (four 1N4004 Diode, one LM7812 Reg), four #30 Alli Clips, one Vert Heat Sink, one HS Mount Kit, 50 T-49 Vec Pin.
2003759
|
|
|
|
|
|
|
ELT 201 PROJECT KIT
1/4 Watt Resistors: one 100 Ohm, two 270 Ohm, two 820 Ohm, two 1K OHM, one 10K Ohm, one 15K Ohm, two 33K Ohm. Capacitors: one .0047 uF, one .1 uF, two 1 uF, one 10 uF, one 2200 uF. Semiconductors: two 1N4001, two PN2222, one 2N2907, two TIP31, 2 heat sinks, 24 T-49 wire wrap pins, one Proto-board. Potentiometers: two 100K PMA Linear, one 100K PMM Audio.
2003756
|
|
|
|
|
|
|
ELT TOOL BOX
This two tray tool box contains a 1.5 meter spool of desolder wick, Rosin Core, one 3/18" x 3" flat head screw driver, one 1/8" x 2" flat head screw driver, #1 3" phillips head screw driver, precision screwdriver set, long nose plier, diagonal cutter, wire stripper, desolder vac pump, soldering iron, 4-pice solder aid set, safety goggles, 3-pice nut driver set ( 5-16", 1/4", 3/16"), ALS-2 HD clip lead set, 10 GM tube solder. Used in the Spring semesters only.
2003757
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
WIRE KIT
Jumper wire kit for breadboarding. 350 piece set. Used for course numbers ELT 111, 157, 202 and ENR 157. 25 each of the following size pre-cut wires: 5", 4", 3", 2", 5/8", 1/2", 3/8", 1/4", 1/8". 50 1" brown, 50 1" white, 50 3/4" green, 50 3/4" purple.
2003753
|
|
|
|
|